Installation Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Seat Belt Height Adjuster

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Install the seat belt height adjuster (1) with the bolts (2).
Tighten: Tighten the seat belt height adjuster bolts to 27 N.m (20 lb ft).
Install the upper center pillar trim panel. Refer to Center Pillar Upper Trim Panel Replacement (Hatchback) or Center Pillar Upper Trim Panel Replacement (Notchback) .