Removal Procedure

WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View of Exterior Rear Door Garnish Molding and Screws

Courtesy of GENERAL MOTORS CORP.

Remove the rear door trim panel. Refer to Rear Door Trim Panel Replacement (Notchback) or Rear Door Trim Panel Replacement (Hatchback) .
Remove the outside channel molding. Refer to Rear Side Door Window Channel Replacement .
Remove the interior rear door garnish molding.
Remove the screws and the exterior rear door garnish molding.

Fig 2: View of Screws Securing Glass To Window Regulator

Courtesy of GENERAL MOTORS CORP.

Remove the door seal trim. Refer to Door Water Deflector Replacement .
Remove the screws that secure the glass to the window regulator.

Fig 3: View of Guide Rail, Bolts, and Glass

Courtesy of GENERAL MOTORS CORP.

Remove the bolts and the guide rail.
Remove the glass from the door.