Reinitialization Procedures
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Press the driver side window switch until the window is under 100 mm (4.0 in) from the top of the window frame.
- Pull the driver side window switch to the first step of the UP position and hold until the window is fully UP.IMPORTANT: Do not put the window switch to the second step of the UP position.
- Continue holding the window switch for approximately 3 seconds after the window motor stall. The driver side window motor assembly is now programmed for the safety function.
- Confirm the reprogramming procedure by performing the auto-up operation.