Installation Procedure
WARNING: This page is about a different car, the 2008 Suzuki Swift +, 2008 Pontiac Wave, and 2008 Chevrolet Aveo. However, it is still accessible from the selected car via links, so may be relevant.
- Install the clock spring (2) to the steering shaft.
- Install the new screws (1).
Tighten: Tighten the clock spring screws to 1.25 N.m (11 lb in).
- Ensure the clock spring (2) is centered. Refer to Inflatable Restraint Steering Wheel Module Coil Centering .
- Connect the driver air bag and horn connectors at the lower steering column.
- Install the driver side knee bolster or instrument panel lower cover.
- Install the upper and lower steering column covers, and install the screws.
- Install the steering wheel. Refer to Steering Wheel Replacement (Hatchback) or Steering Wheel Replacement (Notchback) .
- Connect the negative battery cable.
NOTE:
Refer to Fastener Notice
.