LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Steering Wheel Replacement >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

    Fig 1: Steering Wheel Nut & Retaining Clip
    GM1248385Courtesy of GENERAL MOTORS CORP.
  1. Clip the contact ring on the steering wheel, if necessary.
    2. IMPORTANT: In order to install the steering wheel correctly, match-mark the steering column shaft to the steering wheel.
  2. Align the match marks on the steering wheel and the steering column shaft. Turn the signal-canceling cam on the wheel to the left.
    3. NOTE: Refer to Fastener Notice .
  3. Install the retaining clip and the steering wheel nut.

    Tighten:  Tighten the steering wheel nut to 38 N.m (28 lb ft).

  4. Bend the tabs to secure the retaining clip.
  5. Install the SIR module. Refer to Inflatable Restraint Steering Wheel Module Replacement .
  6. Connect the negative battery cable.
scientia non olet · About LEMON Manuals