LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Repair Instructions >> Multifunction, Turn Signal Switch Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
    Fig 1: View of Instrumental Panel Lower Cover
    GM1248378Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable.
  2. Remove the lower steering column cover panel screws and remove the lower steering column cover panel.
  3. Turn the steering wheel to expose the upper steering column cover panel screws. Remove the upper steering column cover panel screws and remove the upper steering column cover panel.
    4. Fig 2: Removing Electrical Connections & Turn Signal Switch
    GM1248381Courtesy of GENERAL MOTORS CORP.
  4. Remove the turn signal switch by pushing in on the tabs on either side of the switch housing.
  5. Disconnect the electrical connections from the turn signal switch.
scientia non olet · About LEMON Manuals