Conditions for Running the DTC

DTCs P0031, P0032, P0107, P0108, P0110, P0111, P0112, P0113, P0116, P0117, P0118, P0122, P0123, P0125, P0313, P0132, P0133, P0134, P0135, P0217, P0300, P0313, P0324, P0340, P0444, P0445, P0496, P0502, P0506, P0507, P0562, P0563, P0606, P2110, P2610, and U0101 are not set.
The engine has been OFF for more than 6 hours OR The start-up engine coolant temperature (ECT) is less than 45°C (113°F).
The engine is running.
The engine has been at an idle state for 100-600 seconds.
The startup ECT is less than 50°C (122°F).
The intake air temperature (IAT) is more than 35°C (95°F).
The airflow into the engine is less than 45 g/s or the calculated airflow into the engine is less than 43 g/s. If the ECM detects that the airflow into the engine is more than 45 g/s or 43 g/s after the diagnostic runs for 10 seconds, the ECM will not report a pass or fail.
This DTC runs continuously when the above condition is met.