Circuit/System Description

An intake manifold tuning (IMT) valve or variable geometry induction system (VGIS) is used to change the intake manifold plenum configuration. When the IMT valve is open, the intake manifold is configured to one large plenum. When the IMT valve is closed, the intake manifold is configured to 2 smaller plenums. The IMT valve improves engine performance at low and high engine speeds depending on the engine load. Ignition 1 voltage is supplied directly to the IMT valve solenoid. The engine control module (ECM) controls the solenoid by grounding the control circuit. The IMT system contains the following components:

• The IMT valve solenoid
• The IMT valve position sensor
• The IMT valve vacuum reservoir
• The IMT valve vacuum actuator
• The intake manifold tuning valve
• The intake manifold