LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Engine Controls - 1.6L (L91) - DTC P0420 To DTC P2076 >> DTC P0660 >> Circuit/System Testing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Circuit/System Testing

  1. Ignition OFF, disconnect the harness connector of the IMT valve solenoid.
  2. Ignition ON, verify a test lamp illuminates between the ignition 1 voltage circuit and ground.
    • If the test lamp does not illuminate, repair the ignition 1 voltage circuit for a short to ground or an open/high resistance. Replace the fuse, if necessary.
  3. With the ignition OFF, connect a test lamp between the control circuit and the ignition 1 voltage circuit.
  4. Ignition ON, command the IMT valve solenoid ON and OFF with a scan tool. The test lamp should turn ON when the solenoid is commanded OFF, and OFF when the solenoid is commanded ON.
    • If the test lamp remains ON all the time, test for a short to ground on the control circuit. If circuit/connections test normal, replace the ECM.
    • If the test lamp remains OFF all the time, test for a short to voltage or an open/high resistance on the control circuit. If circuit/connections test normal, replace the ECM.
  5. If all circuits/connections test normal, replace the IMT valve solenoid.
scientia non olet · About LEMON Manuals