Circuit/System Verification
- Verify that DTCs P0106, P0107, P0108, P0403, P0404, P0405, and P0488 are not set.
- Ignition ON, observe the EGR Position Sensor parameter. The reading should be between 0-3 percent.
- Operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records. DTC P401 or P0402 should not set.
- If the vehicle passes the Circuit/System Verification Test, then operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records List.