LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - 1.6L (L91) >> Repair Instructions >> Valve Rocker Arm Cover Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Identifying Cover Screws
    GM1371851Courtesy of GENERAL MOTORS CORP.
    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cable.
  2. Remove the engine cover bolts and cover.
    3. Fig 2: View Of Throttle Cable
    GM1371852Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the breather tube from the valve cover.
    4. Fig 3: View Of Crankcase Ventilation Tube
    GM1371853Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the crankcase ventilation tube from the valve cover.
    5. Fig 4: View Of Camshaft Position (CMP) Sensor Connector
    GM1371854Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the camshaft position (CMP) sensor connect.
    6. Fig 5: View Of Ignition Wires And Spark Plugs
    GM1371855Courtesy of GENERAL MOTORS CORP.
  6. Disconnect all of the necessary vacuum lines.
  7. Disconnect the ignition wires from the spark plugs.
    8. Fig 6: Valve Cover Bolts Location
    GM1371856Courtesy of GENERAL MOTORS CORP.
  8. Remove the valve cover bolts.
  9. Remove the valve cover.
    10. Fig 7: View Of Valve Cover And Gasket
    GM1371857Courtesy of GENERAL MOTORS CORP.
  10. Remove the valve cover gasket from the valve cover.
scientia non olet · About LEMON Manuals