LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System >> Repair Instructions >> Coolant Heater Replacement >> Removal Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal Procedure

    Fig 1: Installing/Removing Coolant Heater In Engine Block
    GM785734Courtesy of GENERAL MOTORS CORP.
  1. Drain the cooling system. Refer to Draining and Filling Cooling System .
    2. IMPORTANT: A residual amount of coolant will drain from engine block.
  2. Disconnect the coolant heater power supply cord from the coolant heater.
  3. Remove the coolant heater and seal from the engine block.
scientia non olet · About LEMON Manuals