LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Swift + >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Wiper/Washer Systems >> Wiper System & Washer System >> Diagnostic Information and Procedures >> Wipers Do Not Work on HI Speed
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Wipers Do Not Work on HI Speed

Wipers Do Not Work on HI Speed

Step Action Values Yes No
1
  1. Turn the ignition ON.
  2. Turn the wiper switch to HI.
Is battery voltage available at wiper motor connector terminal 6?		 11-14 V Go to Step 2  Go to Step 3 
2 Replace the wiper motor. Refer to Wiper Motor Replacement .
Is the repair complete?		 - System OK -
3
  1. Use an ohmmeter to test the continuity of the wiper switch.
  2. Turn the wiper switch to HI. Check for continuity between the wiper switch terminal 8 and 9.
Is there continuity between terminals 8 and 9?		 0 Ω Go to Step 5  Go to Step 4 
4 Replace the wiper switch. Refer to Wipers/Washer Switch Replacement .
Is the repair complete?		 - System OK -
5 Repair the open circuit between wiper switch connector terminal 9 and wiper motor connector terminal 6.
Is the repair complete?		 - System OK -
scientia non olet · About LEMON Manuals