Steering Wheel Speed Sensor Removal and Installation: Installation

Install the steering wheel speed sensor with the retaining screw.
Tighten:

Tighten the steering wheel speed sensor retaining screw to 2 N.m (18 lb-in).

Fig 1: Identifying Retaining Screw And Steering Wheel Speed Sensor
Courtesy of SUZUKI OF AMERICA CORP.
Install the intermediate shaft onto the steering column. Refer to INTERMEDIATE SHAFT AND DASH SEAL REMOVAL AND INSTALLATION .
Connect the steering wheel speed sensor electrical connector.
Install the upper and the lower instrument trim panels. Refer to INSTRUMENT CLUSTER TRIM PANEL REMOVAL AND INSTALLATION .
Connect the negative battery cable.

Fig 2: Identifying Steering Wheel Speed Sensor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.