Ignition Lock Cylinder and Switch Removal and Installation: Installation

Install the ignition switch with the ignition switch retaining screw.
Tighten:

Tighten the ignition switch retaining screw to 2.5 N.m (22 lb-in).
Connect the wiring to the ignition switch.

Fig 1: Identifying Ignition Switch Retaining Screw And Wiring
Courtesy of SUZUKI OF AMERICA CORP.
Install the lock cylinder.
Install the upper and the lower steering column cover panel with the screws.
Tighten:

Tighten the upper and the lower steering column cover panel screws to 2.5 N.m (22 lb-in).
Connect the negative battery cable.

Fig 2: Identifying Upper And Lower Steering Column Cover Panel Screws
Courtesy of SUZUKI OF AMERICA CORP.