Transaxle Holding Fixture Assembly Disassembly and Assembly

Transaxle Holding Fixture Assembly Disassembly and Assembly

WARNING: To reduce the possibility of personal injury or transaxle damage, make sure, when doing the next step, that all of the bolts for the support fixture are installed as shown, and that the bolts are tightened to 11 Nm (98 inch lbs.).

Tools Required:
DW260-020 Transaxle Holding Fixture

1. Install the transaxle support fixture DW260-020 onto the transaxle.
2. Torque the support fixture bolts to 11 Nm (98 inch lbs.).
3. Position the transaxle with the rear cover facing up.