Speedometer Driven Gear Removal and Installation: Installation

Coat the O-ring with petroleum jelly.
Install the speedometer-driven gear and the speedometer housing.
Install the speedometer housing retaining bolt.
Tighten:

Tighten the speedometer housing retaining bolt to 4 N.m (35 lb-in).

Fig 1: Identifying Speedometer Housing Retaining Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Connect the speedometer speed sensor electrical connector.

Fig 2: Identifying Speedometer Speed Sensor Electrical Connector
Courtesy of SUZUKI OF AMERICA CORP.