Clutch Master Cylinder Assembly Removal and Installation: Installation

Install the clutch master cylinder and clutch master cylinder nuts.
Tighten:

Tighten the clutch master cylinder nuts to 22 N.m (16 lb-ft).

Fig 1: Identifying Clutch Master Cylinder
Courtesy of SUZUKI OF AMERICA CORP.
Install the master cylinder pipe.

Fig 2: Identifying Master Cylinder Pipe
Courtesy of SUZUKI OF AMERICA CORP.
Connect the master cylinder hose.
Connect the hose clamp on the master cylinder.

Fig 3: Identifying Master Cylinder Hose
Courtesy of SUZUKI OF AMERICA CORP.
Install the push rod fixing pin and push rod.
Install the locking clip.
Bleed the air. Refer to Air Bleeding .
For 2006 Models, adjust the clutch pedal. Refer to Clutch Pedal Adjustment .
Fill the reservoir with clutch/brake fluid up to the proper level.

Fig 4: Identifying 2006 Locking Clip And Push Rod Fixing Pin
Courtesy of SUZUKI OF AMERICA CORP.