Stabilizer Shaft and Insulators Removal and Installation: Installation

Install the stabilizer shaft.
Install the stabilizer shaft insulator clamps, the stabilizer shaft clamp bolt, and the insulators onto the crossmember. Do not tighten the bolt.

Fig 1: Identifying Stabilizer Shaft-To-Crossmember Clamp Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the stabilizer link onto the stabilizer shaft and connect them with the stabilizer shaft-to-stabilizer link nut.
Tighten:
- Tighten the stabilizer shaft-to-stabilizer link nut to 47 N.m (35 lb-ft).
- Tighten the stabilizer shaft-to-crossmember clamp bolts to 25 N.m (18 lb-ft).
Install the front wheels. Refer to WHEEL REMOVAL AND INSTALLATION .

Fig 2: Identifying Stabilizer Shaft-To-Stabilizer Link Nut
Courtesy of SUZUKI OF AMERICA CORP.