LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> Steering >> Power Steering >> Power Assisted Steering System >> Diagnostic Information and Procedures >> Power Rack and Pinion Steering Gear Bench Testing >> Installation Procedure
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Installation Procedure

  1. Stop the engine.
  2. Disconnect the power steering pipes from the power steering gear.
  3. Remove the extensions and reconnect the pressure and return lines.
  4. Install and connect the power steering gear. Refer to Rack and Pinion Assembly Removal and Installation .
  5. Start the engine and stay idle for 10 seconds.
  6. Check the power steering fluid level. Refer to Checking and Adding Fluid .
scientia non olet · About LEMON Manuals