DTC 07: Steering Wheel Speed Sensor Short to 5 V: Troubleshooting
TROUBLESHOOTING REFERENCE
| Step | Action | Value (s) | Yes | No |
|---|---|---|---|---|
| 1 | Did you perform the Variable Effort Steering Diagnostic System Check? | - | Go to Step 2 | Go to DIAGNOSTIC SYSTEM CHECK-VARIABLE EFFORT STEERING |
| 2 |
Is the measured resistance within the specified value? |
4.8 - 5.2 V | Go to Step 3 | Go to Step 8 |
| 3 |
Is the resistance ∞ Ω? |
∞ Ω | Go to Step 4 | Go to Step 6 |
| 4 | Check the resistance between the terminal 14 and 5 of the SSPS control module wiring harness. Is the resistance ∞Ω? |
∞Ω | Go to Step 5 | Go to Step 6 |
| 5 | Check the resistance between the terminal 3 and 5 of the SSPS control module wiring harness. Is the resistance ∞Ω? |
∞Ω | Go to Step 7 | Go to Step 6 |
| 6 | Replace the wiring. Is the repair completed? |
- | Go to Step 9 | - |
| 7 | Replace the SSPS control module. Is the repair complete? |
- | Go to Step 9 | - |
| 8 | Replace the steering wheel speed sensor. Is the repair complete? |
- | Go to Step 9 | - |
| 9 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 2 |