DTC 06: Steering Wheel Speed Sensor Open: Troubleshooting
TROUBLESHOOTING REFERENCE
| Step | Action | Value (s) | Yes | No |
|---|---|---|---|---|
| 1 | Did you perform the Variable Effort Steering Diagnostic System Check? | - | Go to Step 2 | Go to DIAGNOSTIC SYSTEM CHECK-VARIABLE EFFORT STEERING |
| 2 | Check for a poor connection at the SSPS control module and the steering wheel speed sensor. Did you find and correct the condition? |
- | Go to Step 9 | Go to Step 3 |
| 3 |
Is the measured voltage within the specified value? |
4.8 - 5.2 V | Go to Step 4 | Go to Step 8 |
| 4 |
Is the resistance about 0 Ω? |
∞ 0 Ω | Go to Step 5 | Go to Step 7 |
| 5 | Check the resistance between the terminal 2 of steering wheel speed sensor and the terminal 14 of SSPS control module. Is the resistance about 0 Ω? |
∞ 0 Ω | Go to Step 6 | Go to Step 7 |
| 6 | Check the resistance between the terminal 1 of steering wheel speed sensor and the terminal 5 of SSPS control module. Is the resistance about 0 Ω? |
∞ 0 Ω | Go to Step 9 | Go to Step 7 |
| 7 | Repair the wiring. Is the repair completed? |
- | Go to Step 10 | - |
| 8 | Replace the steering wheel speed sensor. Is the repair completed? |
- | Go to Step 10 | - |
| 9 | Replace the SSPS control module. Is the repair complete? |
- | Go to Step 10 | - |
| 10 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 2 |