LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And Ventilation >> Repair Instructions >> Temperature Control Cable Removal and Installation >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Temperature Control Cable Removal and Installation: Removal

  1. Disconnect the negative battery cable.
  2. Remove the center molding. Refer to CENTER MOLDING REMOVAL AND INSTALLATION .
    Fig 1: Identifying Center Molding
    G04717743Courtesy of SUZUKI OF AMERICA CORP.
  3. Disconnect the mode control cable from the mode door.
  4. Disconnect the temperature control cable eyelet from the post on the controller.
  5. Pry off the clip of the temperature control cable.
    Fig 2: Identifying Mode Control Cable
    G04717744Courtesy of SUZUKI OF AMERICA CORP.
  6. Slide the cable eyelet off the post on the temperature door lever.
  7. Pry off the Clip of the temperature cable.
    Fig 3: Identifying Temperature Cable
    G04717745Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals