Park/Neutral Start Switch Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.

Disconnect the negative battery cable.
Disconnect the park/neutral position switch electrical connector.
Disconnect the shift control cable and the retaining clip.

Fig 1: Identifying Shift Control Cable And Retaining Clip
Courtesy of SUZUKI OF AMERICA CORP.
Remove the shift lever nut and the shift lever.

Fig 2: Identifying Shift Lever And Nut
Courtesy of SUZUKI OF AMERICA CORP.
Remove the park/neutral start switch.

Fig 3: Identifying Park/Neutral Start Switch Bolts
Courtesy of SUZUKI OF AMERICA CORP.