LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Brakes - Abs) >> Diagnostic Information and Procedures >> Power Supply to Control Module, No DTCs Stored >> Test Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Test Description

WARNING: This page is about a different car, the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, and 2007 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.

Number(s) below refer to the step number(s) on the Diagnostic Table.

  1. This step determines whether there is voltage at the battery and the high current source.
  2. This step checks for voltage at the ignition 1 source.
  3. This step begins the check for voltage at the EBCM end of the ABS harness.
  4. This step checks for a defective ground connection.
  5. This is a check for a defective EBCM connector.
scientia non olet · About LEMON Manuals