LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Interior Trim) >> Repair Instructions >> Floor Carpet Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Floor Carpet Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the floor carpet.
  2. Install the floor carpet retaining clips.
    Fig 1: Identifying Floor Carpet & Retaining Clips
    G04720582Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the gearshift housing with the bolts.

    Tighten: 

    Tighten the gearshift housing bolts to 8 N.m (70 lb-in.).

    Fig 2: Identifying Gearshift Housing & Bolts
    G04720581Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the floor console. Refer to Floor Console Installation .
  5. Install the left and the right kick panels. Refer to Kick Panel Installation .
  6. Install the front seats. Refer to FRONT BUCKET SEAT INSTALLATION .
  7. Install the left and the right lower B-pillar trim panels. Refer to Lower B-pillar Trim Panel Installation .
  8. Install the left and the right front rocker trim panels.
  9. Install the left and the right lower front seat belt anchors to the B-pillar with the bolts.

    Tighten: 

    Tighten the seat belt anchor bolts to 38 N.m (28 lb-ft).

  10. Install the left and the right rear rocker trim panels. Refer to Rear Rocker Trim Panel Installation .
  11. Install the rear seat cushion. Refer to REAR SEAT CUSHION INSTALLATION .
  12. Connect the negative battery cable.
    Fig 3: Identifying Front Seat Belt Anchor & Bolt
    G04720580Courtesy of SUZUKI OF AMERICA CORP.