Manifold Absolute Pressure Sensor Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the MAP sensor connector to the MAP sensor.
- Install the MAP sensor into the intake manifold.
- Install the MAP sensor retaining bolt.
Tighten
Tighten the MAP sensor retaining bolt to 4 N.m (35 lb-in).
- Connect the fuel rail. Refer to "FUEL RAIL AND INJECTORS REMOVAL AND INSTALLATION :".
- Connect the negative battery cable.