LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Engine Electrical Devices) >> Repair Instructions >> Engine Control Module Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Engine Control Module Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the ECM connectors to the ECM.
  2. Align the ECM into the mounting base.
  3. Snap the ECM into its mounting base.
  4. Install the ECM trim locks.
  5. Install the air intake tube and resonator.
  6. Connect the negative battery cable.
  7. Perform a crankshaft position system variation learning procedure. Refer to "TEC (TOOTH ERROR CORRECTION) LEARN PROCEDURE :".
scientia non olet · About LEMON Manuals