Tightening Torque Specifications

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

TIGHTENING TORQUE SPECIFICATIONS

Application	N.m	lb-ft	lb-in.
Air Cleaner Housing Assembly Retaining Bolts	12	-	106
Band Clamp Bolt	5	-	44
Clamp Bolts	4	-	35
Clutch Plate and Hub Assembly Retaining Nut	17	13	-
Discharge Hose Connecting Block-to-Compressor Retaining Nut	33	24	-
Discharge Hose Connecting Block-to-Condenser Retaining Nut	16	12	-
Expansion Valve Bolts	10	-	89
Front Compressor-to-Bracket Mounting Bolts	35	26	-
High-Pressure Pipe-to-Evaporator Flange Connecting Block Nut	10	-	89
High-Pressure Pipe-to-Receiver-Dryer Connecting Block Nut	10	-	89
Liquid Evaporator Pipe Clamp Bolt	5	-	44
Pressure Relief Valve	16	12	-
Pressure Transducer	7	-	62
Rear Compressor-to-Bracket Mounting Bolts	20	15	-
Receiver-Dryer to Condenser Pipe Nut	14	10	-
Suction Hose Clamp Bolt	10	-	89
Suction Hose Connecting Block Retaining Nuts	10	-	89
Suction Hose Support Clamp Retaining Bolt	5	-	44
Suction Hose Support Clamp Retaining Nut	5	-	44
Through-Bolts	10	-	89
Upper Condenser Mount Nuts	4	-	35
Vacuum Tank-to-Fire Wall Nuts	4	-	35
Air Filter Cover Nut	4	-	35
Ambient Air Temperature Retaining Bracket Nut	6	-	53
Blower Motor Resistor Screws	6	-	53
Control Assembly Retaining Screws	2.5	-	22
Expansion Valve Bolts	10	-	89
Heater/Air Distributor Assembly Case Screws	8	-	71
Liquid Evaporator Pipe Retaining Nuts	10	-	89
Suction Hose Retaining Nuts	10	-	89