Shift Control Lever Assembly Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the bolts and the shift control assembly.
Tighten:

Tighten the bolts to 8 N.m (71 lb-in.).

Fig 1: Identifying Shift Control Assembly & Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Install the shift control cable onto the bracket and tighten the nut.
Install the shift control cable adjuster pinch nut.
Tighten:

Tighten the shift control cable adjuster pinch nut to 8 N.m (71 lb-in.).

Fig 2: Identifying Shift Control Cable & Bracket
Courtesy of SUZUKI OF AMERICA CORP.
Connect the electrical switch connectors.
Install the floor console. Refer to FLOOR CONSOLE INSTALLATION .
Connect the negative battery cable.

Fig 3: Identifying Electrical Switch Connectors

Courtesy of SUZUKI OF AMERICA CORP.