Oil Pump Assembly Disassembly and Assembly

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Remove the oil pump housing bolts.
Using the plastic hammer. Take out the oil pump housing.
Installation Notice

Tighten:

Tighten the oil pump housing bolts 10 N.m (89 lb-in.).

Fig 1: Removing Oil Pump Housing With Plastic Hammer
Courtesy of SUZUKI OF AMERICA CORP.
Remove the stator shaft bolts.

Fig 2: Identifying Stator Shaft Bolts
Courtesy of SUZUKI OF AMERICA CORP.
Dismantle the oil pump gear, ring gear
Installation should follow the removal procedure in the reverse order.

Fig 3: Identifying Oil Pump Gear And Ring Gear

Courtesy of SUZUKI OF AMERICA CORP.