Stabilizer Bar Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Install the U-clamp and bushing with stabilizer bar.
Install the stabilizer bar bolts and nuts.
Tighten:

Tighten the stabilizer bar bolts and nuts to 50 N.m (37 lb-ft).
Install the stabilizer link and crossmember.

Fig 1: Identifying U-Clamp, Bushing & Stabilizer Bar
Courtesy of SUZUKI OF AMERICA CORP.