Repair Instructions: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the shift linkage assembly.
- Install the fixing shaft pin and connect the linkage connection part to the transaxle rear mounting bracket.
- Install the universal joint to the transaxle.
- Install the clip and the bolt from universal joint.
- Install the rod clamp. Refer to "SHIFT LINKAGE ADJUSTMENT :".
- Adjust the shift linkage. Refer to "SHIFT LINKAGE ADJUSTMENT :".
- Connect the negative battery cable.