Engine Mount (RH) Installation

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Installation should follow the removal procedure in the reverse order.
Install the engine mount (RH).
Tighten:
- Tighten the engine mount bracket-to-hydro mount nut to 55 - 70 N.m (41 - 52 lb-ft).
- Tighten the engine mount bracket bolt to 42 - 60 N.m (31 - 44 lb-ft).
- Tighten the 2 engine mount bracket nuts to 42 - 60 N.m (31 - 44 lb-ft).
  
  Fig 1: Identifying Engine Mount Bracket (RH) With Mounting Bolts And Nuts
  Courtesy of SUZUKI OF AMERICA CORP.