Knock Sensor Removal

WARNING: This page is about a different car, the 2006 Suzuki Verona. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect the negative battery cable.
Remove the VIS vacuum tank. Refer to VIS Vacuum Tank Removal .

Fig 1: Removing/Installing VIS Vacuum Tank Bolt
Courtesy of SUZUKI OF AMERICA CORP.
Remove the wiring harness from the wiring support bracket.

Fig 2: Disconnecting Wiring Harness From Wiring Support Bracket
Courtesy of SUZUKI OF AMERICA CORP.
Disconnect the knock sensor wiring harness connector.
Remove the knock sensor.

Fig 3: Disconnecting Knock Sensor Wiring Harness Connector
Courtesy of SUZUKI OF AMERICA CORP.