Map Lamp Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- Connect the electrical connector.CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
- Install the map lamp with the screws.
Tighten
Tighten the map lamp screws to 1.5 N.m (13 lb-in).
- Install the map lamp lens.
- Connect the negative battery cable.