Temperature Control Cable Removal and Installation: Installation
WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
- Install the temperature control cable eyelet to the post on the temperature door lever.
- Install the clip of the temperature cable.
- Install the temperature control cable eyelet to the post on the controller.
- Install the clip of the temperature control cable.
- Install the mode control cable to the mode door.
- Insert the center molding into position on the instrument panel.
- Move the temperature control to verify the smooth operation and function of the door and the cable.
- Connect the negative battery cable.
- Operate the heating and cooling systems to verify proper function.