LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Power Assisted Steering System) >> Repair Instructions >> Outer Tie Rod Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Outer Tie Rod Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reposition the adjusting nut to the marks on the inner tie rod.
  2. Install the outer tie rod by twisting it onto the inner tie rod.
    Fig 1: Removing/Installing Outer Tie Rod By Twisting It Off Of/Onto Inner Tie Rod
    G04103966Courtesy of SUZUKI OF AMERICA CORP.
  3. Connect the outer tie rod to the steering knuckle.
  4. Perform a front toe adjustment. Refer to "FRONT TOE ADJUSTMENT :".
  5. Tighten the adjusting nut.

    Tighten 

    Tighten the outer tie rod adjusting nut to 64 N.m (47 lb-ft).

  6. Install the outer tie rod nut.

    Tighten 

    Tighten the outer tie rod nut to 50 N.m (37 lb-ft).

  7. Install the wheel. Refer to "WHEEL REMOVAL AND INSTALLATION :".
    Fig 2: Identifying Outer Tie Rod Nuts
    G04103967Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals