LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Seats) >> Repair Instructions >> Front Seatback Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Front Seatback Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the seatback onto the seat cushion.
    CAUTION: Dissimilar metals in direct contact with each other may corrode rapidly. Make sure to use the correct fasteners to prevent premature corrosion.
  2. Install the front seatback bolts.

    Tighten 

    Tighten the front seatback bolts to 45 N.m (33 lb-ft).

  3. Connect the electrical connectors.
    Fig 1: Installing Front Seatback Bolts
    G04104562Courtesy of SUZUKI OF AMERICA CORP.
  4. Install the seat trims to its original position.
  5. Install the front bucket seat in the vehicle. Refer to "FRONT BUCKET SEAT REMOVAL AND INSTALLATION :".
    Fig 2: Installing Seat Trims
    G04104563Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals