LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 141 (Engine - Diagnostic Introduction) >> Diagnostic Information & Procedure >> Symptom Diagnosis Table >> Troubleshooting
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Symptom Diagnosis Table: Troubleshooting

WARNING: This page is about a different car, the 2008 Suzuki Reno, 2008 Suzuki Forenza, 2007 Suzuki Reno, and 2007 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
TROUBLESHOOTING CHART

Step Action Value (s) Yes No
1 Perform an ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK .
Is the check complete?		 - Go to Step 2 Go to ON-BOARD DIAGNOSTIC (OBD II) SYSTEM CHECK 
2
  1. Inspect all of the Engine Control Module (ECM) ground connections.
  2. Inspect all of the vacuum hoses for splits, kinks, and proper connections.
  3. Check for air leaks at all of the mounting areas of the intake manifold sealing surfaces.
  4. Inspect the ignition wires for cracking, hardness, proper routing, and carbon tracking.
  5. Inspect the wiring for proper connections, pinches, and cuts.

Are all checks complete?		 - Go to Appropriate Symptom Table. -
scientia non olet · About LEMON Manuals