LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Fuel System) >> Repair Instructions >> Fuel Pump Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Fuel Pump Removal and Installation: Installation

WARNING: This page is about a different car, the 2005 Suzuki Reno and 2005 Suzuki Forenza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean the gasket mating surface on the fuel tank.
  2. Position the new gasket in place.
  3. Install the fuel pump into the fuel tank in the same location as removed for ease of line and connector installation.
  4. Install the fuel pump assembly clip.
  5. Connect the fuel pump assembly connector.
  6. Install the fuel pump line.
    Fig 1: Connecting Fuel Pump Assembly Connector
    G04102943Courtesy of SUZUKI OF AMERICA CORP.
  7. Install the fuel pump access cover.
  8. Connect the negative battery cable.
  9. Perform an operational check of the fuel pump.
  10. Install the rear seat. Refer to "REAR SEAT CUSHION REMOVAL AND INSTALLATION :".
    Fig 2: Installing Fuel Pump Access Cover
    G04102944Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals