LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Standard >> Repair and Diagnosis (Single Page) >> Engine Performance >> System >> Aux. Emission Control Devices >> Repair Instructions >> Rear Heated Oxygen Sensor (HO2S2) Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear Heated Oxygen Sensor (HO2S2) Removal and Installation: Installation

  1. Install the rear heated oxygen sensor.

    Tighten: 

    Tighten the heated oxygen sensor to 42 N.m (31 lb-ft).

  2. Connect the electrical connector.
  3. Connect the negative battery cable.
scientia non olet · About LEMON Manuals