Wiper Switch and Lever Removal and Installation: Installation

Connect the electrical connector to the wiper switch. Connect the cruise control connector, if equipped.
Install the wiper switch by snapping it into the switch housing.

Fig 1: Identifying Electrical Connector On Wiper Switch
Courtesy of SUZUKI OF AMERICA CORP.
Install the upper and the lower steering column cover panels. Install the upper and the lower steering column cover panel screws.
Tighten:

Tighten the upper and the lower steering column cover panel screws to 2.5 N.m (22 lb-in).
Connect the negative battery cable.

Fig 2: Identifying Upper And Lower Steering Column Cover Panel Screws
Courtesy of SUZUKI OF AMERICA CORP.