Park/Neutral Start Switch Removal and Installation: Installation

Tools Required: 

DW260-050 Park/Neutral Switch Installer 

1. Install the park/neutral start switch.

   Tighten: 

   Tighten the park/neutral start switch bolts to 10 N.m (89 lb-in).

2. Adjust the park/neutral switch using the Park/Neutral switch installer DW260-050.
   Fig 1: Identifying Park/Neutral Switch Installer DW260-050

   Courtesy of SUZUKI OF AMERICA CORP.
3. Install the shift lever and the shift lever nut.

   Tighten: 

   Tighten the shift lever nut to 10 N.m (89 lb-in).

   Fig 2: Identifying Shift Lever Nut

   Courtesy of SUZUKI OF AMERICA CORP.
4. Connect the shift control cable and the retaining clip.
5. Connect the park/neutral position switch electrical connector.
6. Connect the negative battery cable.
   Fig 3: Identifying Shift Control Cable And Retaining Clip

   Courtesy of SUZUKI OF AMERICA CORP.