Brake F, Slotted Nut Disassembly and Assembly and Installation: Notes

Tools Required: 

DW260-060 Brake F Split Stop Ring Remover 

1. Remove the side shaft. Refer to Side Shaft Disassembly and Assembly .
2. Take OFF the disc set and the brake F inner disc carrier.
   Fig 1: Removing Disc Set

   Courtesy of SUZUKI OF AMERICA CORP.
   Fig 2: Removing Brake F Inner Disc Carrier

   Courtesy of SUZUKI OF AMERICA CORP.
3. Mount fixture and remove the brake F split stop ring.
   Fig 3: Removing Brake F Split Stop Ring

   Courtesy of SUZUKI OF AMERICA CORP.
4. Remove the fixture and take off the cup spring.
   Fig 4: Removing Cup Spring

   Courtesy of SUZUKI OF AMERICA CORP.
5. Release the piston F by applying compressed air to the bore.
   Fig 5: Releasing Piston F

   Courtesy of SUZUKI OF AMERICA CORP.
6. Remove piston F and bearing plate with spur gear.
7. Installation should follow the removal procedure in the reverse order.
   Fig 6: Removing Piston F And Bearing Plate With Spur Gear

   Courtesy of SUZUKI OF AMERICA CORP.