Park/Neutral Position Switch
The Park/Neutral Position Switch is located on the selector shaft and informs the TCM of the current selector lever position P-R-N-D-3-2-1.
The selector lever position is transmitted to the TCM in encoded form along 4 lines. The encoding is such that malfunctions in the connecting lead are identified.
The Park/Neutral Position Switch is located on the selector shaft, which is connected to the selector lever via a pull cable. In addition, the Park/Neutral Position Switch controls the starter interlock, the reversing light and the selector lever position indicator on the instrument panel.
Signal Combination
SIGNAL COMBINATION REFERENCE CHART
| L1 | L2 | L3 | L4 | |
|---|---|---|---|---|
| P | 0 | 0 | 12 | 0 |
| R | 0 | 0 | 0 | 12 |
| N | 0 | 12 | 0 | 0 |
| D | 12 | 12 | 12 | 0 |
| 3 | 12 | 12 | 0 | 12 |
| 2 | 12 | 0 | 12 | 12 |
| 1 | 0 | 12 | 12 | 12 |