Front Parallel Link Removal and Installation: Installation
- Install the front parallel link.
- Install the front parallel link onto the rear knuckle with the bolt.
Tighten:
Tighten the front parallel link-to-knuckle bolt to 120 N.m (89 lb-ft).
- Install the front parallel link onto the rear cross-member with the bolt. Do not tighten.
- For vehicles equipped with the antilock braking system, install the ABS housing assembly onto the front parallel link and the ABS sensor line into the knuckle.
- Install the wheel. Refer to WHEEL REMOVAL AND INSTALLATION .
- Perform a rear toe adjustment. Refer to Rear Toe Adjustment .