DTC 01: Actuator Circuit Open: Troubleshooting
TROUBLESHOOTING REFERENCE
| Step | Action | Value (s) | Yes | No |
|---|---|---|---|---|
| 1 | Did you perform the Variable Effort Steering Diagnostic System Check? | - | Go to Step 2 | Go to DIAGNOSTIC SYSTEM CHECK-VARIABLE EFFORT STEERING |
| 2 | Check for a poor connection at the SSPS control module and SSPS actuator. Did you find and correct the condition? |
- | Go to Step 8 | Go to Step 5 |
| 3 |
Is the resistance within specified value? |
7-17 Ω | Go to Step 4 | Go to Step 6 |
| 4 | Check the resistance between the terminal 1, 2 of SSPS actuator and the terminal 2, 1 of SSPS control module. Is the resistance about 0 O? |
≈ 0 Ω | Go to Step 7 | Go to Step 5 |
| 5 | Replace the SSPS actuator. Is the repair completed? |
- | Go to step 8 | - |
| 6 | Replace the wiring. Is the repair completed? |
- | Go to Step 8 | - |
| 7 | Replace the SSPS control module. Is the repair completed? |
- | Go to Step 8 | - |
| 8 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 2 |