LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Suzuki >> 2006 >> Reno Base, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Heater And Ventilation >> Repair Instructions >> Temperature Control Cable Removal and Installation >> Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Temperature Control Cable Removal and Installation: Installation

  1. Install the temperature control cable eyelet to the post on the temperature door lever.
  2. Install the clip of the temperature cable.
    Fig 1: Identifying Temperature Cable
    G04717746Courtesy of SUZUKI OF AMERICA CORP.
  3. Install the temperature control cable eyelet to the post on the controller.
  4. Install the clip of the temperature control cable.
  5. Install the mode control cable to the mode door.
    Fig 2: Identifying Center Molding
    G04717743Courtesy of SUZUKI OF AMERICA CORP.
  6. Insert the center molding into position on the instrument panel.
  7. Move the temperature control to verify the smooth operation and function of the door and the cable.
  8. Connect the negative battery cable.
  9. Operate the heating and cooling systems to verify proper function.
    Fig 3: Identifying Center Molding In Proper Position
    G04717748Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals