Tightening Torque Specifications
WARNING: This page is about a different variant/trim than selected.
TIGHTENING TORQUE SPECIFICATIONS
| Application | N.m | lb-ft | lb-in |
|---|---|---|---|
| Backup Lamp Switch | 20 | 15 | - |
| Bearing Plate Bolts | 22 | 16 | - |
| Bearing-Adjusting Ring-Retainer Plate Bolt | 5 | - | 44 |
| Damping Block Connection Nut and Bolt | 68 | 50 | - |
| Differential Cover Bolts | 40 | 30 | - |
| 5th-Gear Fork Bolts | 22 | 16 | - |
| 5th-Gearshift Connector Bolts | 7 | - | 62 |
| Gearshift Housing Bolts | 7 | - | 62 |
| Gearshift Lever Cover Bolts | 22 | 16 | - |
| Input Driveshaft Detent Screw | 15 | 11 | - |
| Rear Damping Block Retaining Bolts | 68 | 50 | - |
| Rear Mounting Bracket Bolts | 90 | 66 | - |
| Ring-Gear Bolts | 70 | 52 | - |
| Rod Clamp Bolt | 14 | - | 124 |
| Speedometer Housing Retaining Bolt | 4 | - | 35 |
| Speedometer-Driven Gear Bolt | 5 | - | 44 |
| Transaxle Cover Bolts | 18 | 13 | - |
| Transaxle Lower Retaining Bolts (a) | 73 | 54 | - |
| Transaxle Lower Retaining Bolt (b) | 31 | 23 | - |
| Transaxle Lower Retaining Bolts (c) | 21 | 15 | - |
| Transaxle Upper Retaining Bolts | 73 | 54 | - |
| Transaxle Upper Mounting Bracket Bolts | 48 | 35 | - |
| Right-Side Bearing Retainer Bolts | 25 | 18 | - |
| Support Bracket Bolts | 7 | - | 62 |